Bergmann MPB 906 907 Refurbished Wet Waste Compactor

Additional Info

A system designed by Bergmann over 40 years ago results in cleanliness without external refuse deposits. The MPB can be fed continuously, because the swing piston crosses below the waste that is fed during backstroke. This drops in front of the press plate and is pressed into the container on the pre-stroke. This is how optimal compression is achieved. Years of experience and continuous development led to a lower dead weight with higher construction stability.

The oscillating suspended press ram ensures that the pressing cylinders do not come into contact with the waste. which eliminates costly cleaning work in front of, behind or under the press ram. With this machine, the entire filling area is always available with every cycle.

The Mobile-Pack-Bins (MPB) are characterised by high compaction results and long service lives. Thus, the machines are not only very economic, but they also make a valuable contribution to the reduction of CO2 levels.

There are no cleaning costs following every emptying. Thanks to a waterproof design, the installation locations also remain clean. The aggregate and switch box are easily accessible from the outside. All things considered, maintenance and repair costs are thus significantly reduced, and durability is increased.

A range of accessories are available when ordered with the MPB 906/907 SN machines including:  a double pump (24 second cycle time), rollers on the front, hooks on the rear, high side walls, watertight finish, hydraulic 75% and 100% full signals, drainage plug, integrated pinion and comb lift bin lifts and bin lid openers, guide rails and special RAL paint.

One of our most popular Wet Waste machines in this range is the Bergmann MPB 906/907 SN/20.